Categories

Categories

Construction Materials Testing and Inspection

Partneři


Povrchová úpravaOdborný server


Tvrdoměry materiálů, stolní, přenosnéTvrdoměry


COMTEST®OP1 PMA PLUS pull-out/pull-off adhesion test equipment for the construction industry

OP1 PMA PLUS

COMTEST OP1 series devices are intended for measuring the force needed to pull out plastic or metal construction anchors. The tensile strength is exerted perpendicular to the surface. Support points are located at least 150 mm from the tension axis. The COMTEST OP1 PMA PLUS is especially suited for checking the condition of masonry prior to the installation of insulation.

More details

DESCRIPTION COMTEST®OP1 PMA PLUS:

COMTEST OP1 series devices are intended for measuring the force needed to pull out plastic or metal construction anchors. The tensile strength is exerted perpendicular to the surface. Support points are located at least 150 mm from the tension axis. The COMTEST OP1 PMA PLUS is especially suited for checking the condition of masonry prior to the installation of insulation.

The test procedure and evaluation of results is described by the European standard ETAG 014 - Plastic anchors for fixing of external thermal insulation composite systems with rendering.

Technical Specifications DESCRIPTION COMTEST®OP1 PMA PLUS::

Device typeCOMTEST®OP1/1 PMA PLUSCOMTEST®OP1/2 PMA PLUSCOMTEST®OP1/3 PMA PLUS
Measurement range for pull-out test 5 kN 10 kN 15 kN
Measurement range for pull­off test on the dolly diameter 50mm 2,5 MPa 5,0 MPa 7,5 MPa
Absolute maximum loading force 6 kN 12 kN 18 kN
Resolution ±0,001 kN ±0,002 kN ±0,004 kN
Max. measurement error ±1,5 % of measured value
Memory capacity 100 measures: date, time, number of the test, max. pull-out force, average force increase, max. force increase
Weight of load application unit, triangular base incl. 4,9 kg
Load app. unit dimensions 250 x 85 mm
Operating temperature -10°C to 50°C
Storage temperature -20°C to 60°C
Adapter for plastic anchors -load limit Clamping head with lock (up to 10 kN)
Power supply/capacity Built-in accumulator, 12 hours
Basic pull-out test kit Triangular base with adjustable height for various types of plastic anchor(up to 15 kN)
Pull-out test accessories Adapter sleeves for pull-out metal anchor tests up to 15 kN (3 pieces: diameter 8, 10 and 14 mm)

EACH COMPLETE DELIVERY CONTENTS COMTEST®OP1 PMA PLUS:

  • Loading unit with fastener
  • Measuring unit – with digital memory for up to 100 measures.
  • Triangular adaptor with 260mm adjustable props.
  • Special head for plastic anchors with fastening peg up to
  • 10 kN.
  • Instruction manual.
  • Certificate of calibration issued by Czech metrological institute (EU valid).
  • Heavy-duty plastic case.

ACCESORIES:

  • Three adapter sleeves for pull-out metal anchor tests up to 15 kN.
  • Six test discs with diameter 50mm and three fastener pegs according pull-off test standard.

17 other products in the same category

Send a message

COMTEST®OP1 PMA PLUS pull-out/pull-off adhesion test equipment for the construction industry

COMTEST®OP1 PMA PLUS pull-out/pull-off adhesion test equipment for the construction industry

We will never spam you

What can we do for you?

Product successfully added to the product comparison!