Cena
0 Kč

Výrobce
TQC Sheen

Kód produktu
LD54xx

Plastové fólie a certifikované plastové podložky. Dostupné v rozsahu 12 až 20 000 mikronů. Tyto fólie lze aplikovat na všechny podklady ze železných i neželezných kovů.
Necertifikované plastové podložky
Necertifikované plastové podložky (fólie) poskytují rychlou provozní kontrolu přístroje a umožňují uživateli provádět cvičná měření při umístění na kov. Více

Plastic foils and certified plastic shims. Available in the range of 12 to 20.000 micron. These foils can be applied to all ferrous- or non-ferrous metal substrates.

Non-Certified Plastic Shims

Non-Certified Plastic Shims (foils) provide a quick operational check of the instrument and they allow the user to perform practice measurements when placed over metal.

  • Provide a quick operational check of the instrument by allowing the user to perform practice measurements
  • Can be used to protect the probe when measuring on tacky, rough or hot surfaces
  • Labeled in both Metric and Imperial units

Certified Plastic Shims

Certified Plastic Shims (foils) provide an economical alternative to coated metal plates. They have a reduced accuracy of ±2 µm (±0.08 mil). A coating thickness gage measures shim thickness when this shim is placed over a smooth metal surface (zero plate). Alternatively, they can be placed over an uncoated metal substrate. They are not suitable for use with magnetic pull-off gages.

  • Each shim is packaged in their own plastic protective pouch
  • Certificate of Calibration showing traceability to NIST is included with each shim or set of shims
  • Certified and labeled in both Metric and Imperial units

ORDERING INFORMATION

Art. No. LD5400

Coating thickness calibration standard, set of 5 Plastic Shims, Non-Certified
25 µm (1 mil) Orange ± 20%, 50 µm (2 mil) Red ± 10%, 125 µm (5 mil) Blue ± 5%, 250 µm (10 mil) Brown ± 5%, 500 µm (20 mil) Yellow ± 5%

Art. No. LD5417

Coating thickness calibration standard, set of 8 Plastic Shims, Certified, accuracy ±2 µm (±0.08 mil) 25 µm (1 mil) Orange, 50 µm (2 mil) Red, 75 µm (3 mil) Green, 125 µm (5 mil) Blue, 250 µm (10 mil) Brown, 500 µm (20 mil) Yellow, 1000 µm (40 mil) White, 1500 µm (60 mil) Black

Art. No. LD5418

Coating thickness calibration standard, single Plastic Shim, Certified, ±2 µm (±0.08 mil)
Select one from: LD5417