Using the latest transducer designs - the single element delay tip transducer - the Elcometer 207 gauges will measure thin materials in "Echo-to-Echo Mode" and then automatically switch to "Interface Echo Mode" when measuring thicker materials and plastics. Furthermore, the Elcometer 207's Echo-to-Echo Mode offers the user the ability to measure the materials' thickness WITHOUT removing the paint or coating.

All Elcometer 207's and 207DL gauges now have a new operating mode, the PLAS Mode. This mode has been specifically designed to provide accurate readings when measuring thin plastics.

• Two calibration options - Speed of Sound, Calibration to a known Thickness.
• Backlight display on both versions.
• Data output available on both versions.
• 1000 reading memory in up to 10 batches (Elcometer 207DL only)
• ElcoMaster^TM and EDTS+ Excel Link supplied free of charge with the Elcometer 207DL.

At a glance:

• Robust, easy to use precision ultrasonic thickness gauges, ideal for thin substrates.
• Available in basic and memory versions.
• Can also measure thicker materials using the interface - echo mode

The Elcometer Ultrasonic Thickness Gauge Features Explained:

• Interface-to-Echo Mode : In interface-to-echo mode, the gauge can take readings on thicker plastics and other materials between 1.65mm and 25.4mm (0.065" to 1")
• Echo-to-Echo Mode: Measurements can be taken on materials as thin as 0.15mm (0.006 inches). In echo-to-echo mode, the user can take measurements on pre-coated materials without having to remove the coating prior to measurement i.e. the gauge ignores the coating thickness.
• High Speed Scan Mode: Identifies the minimum thickness point over a large area by moving the transducer over the surface. While the transducer is in contact with the material being measured the smallest value is held in memory and displayed when scanning is complete.
• PLAS Mode: Specifically for use when measuring thin plastics. Please note that to use this mode, a special Graphite Delay Line must be purchased, Part Number T92016871.
• Differential Mode: Displays the positive or negative difference between a pre-set nominal (target) thickness value and the actual measured value.
• Alarm Mode: Allows the user to set a target so that an audible and visual alarm operates when taking measurements. If the measurement falls below a pre-set nominal (target) value a red LED will light and the bleeper sounds. A green LED will light to indicate an acceptable thickness.
• Data Output: Allows the user to send data direct to a printer or PC.
• Data-Logging: A storage capacity of 1000 measurements - 10 files consisting of 100 sequential storage locations. Allows the user to send data direct to a printer or PC.
• EDTS⁺ Excel link Software: PC data transfer utility including generator of ASCII files and "data drop" add in for Microsoft Excel^TM spreadsheets.
• ElcoMaster^TM Software: Stand alone data management program with advance facilities for archiving, reporting, analysis and data export.